A site of endless curiosity

Review: KG-UV Commander – Free programming software for the Wouxun

with 11 comments

Read a related posting –

Software is also available for Yaesu and ICOM – click for more information –

If you have a WOUXON radio you will definitely want to download and take a look at KG-UV Commander from Jim Mitchell KC8UNJ. This program is free to use and available at

At the time of this writing, there are two big advantages of KG-UV Commander over the software provided (free) from WOUXUN

  1. The ability to import/export frequency lists in standard CSV (Comma Separated Values) format. There are two obvious implications of this. First, you can save/archive different frequency lists ready for upload “at the click of a button”. Second, CSV is a standard format that can be manipulated by standard spreadsheet programs – such as EXCEL and Open Office (free).
  2. The ability to set the band limits for the radio

Using KG-UV Commander is a snap

Note:  This posting is primarily directed to an Amateur Radio audience.  No technical background will be given

The programming cable that you will get with the radio contains a USB / Serial converter. So when you plug the USB cable into your PC you will see a new COM (serial) port pop up. On my laptop its COM5. KG-UV Commander will auto-detect this new COM port when you start it up for the first time.  You should not have any problem with this aspect of the radi<->computer interface.

After the software gets started, read the radio’s configuration (including the existing memory contents) into the programming software. If you want to do any major manipulation of the frequencies or create multiple frequency lists use the file –> export to CSV… to export the radio’s memory contents to a simple comma separated file.

If you don’t  have Microsoft Excel then you can use the Open Office spreadsheet program to open and manipulate the file. When you are done then re/save the file in the same format.


The WOUXUN is not really a scanner. But you can RX outside the amateur radio bands with this radio. So suppose you want to listen to some of the public safety frequencies (or businesses, or really anything else) in your area.

One of the best places to get frequencies is

Unfortunately, you can’t just cut/paste frequencies from a radio reference page to KG-UV Commander.  You will need to clean them up a bit.  One way to do this is to use a spreadsheet program.  If you don’t have Microsoft EXCEL you can use a free alternative – http://OpenOffice.Org

Here are some suggested steps on how to get frequencies out of Radio Reference, stage them in Open Office spreadsheet for clean up and manipulation, then paste them into KG-UV Commander.  Finally, wite them to the radio and save a copy to your PC hard drive (or in the cloud)

  1. Start up KG-UV Commander and go to the tab with the radio’s memory.  Locate the place you want to paste in new frequencies
  2. Go over to and find the frequencies you want to past into the radio.
  3. On the page with the frequencies, select and copy the table using your browser
  4. In Open Office spreadsheet, do a “paste special… HTML format” into a blank spreadsheet. The result will be the table of frequencies in rows and columns just like you see on the radio reference web page.
  5. Manipulate the data to be pasted in the KG-UV Commander.  For the example, I found the frequencies for the Chicago Police department. I picked the column that had the frequency and the column that had the name. I had to shorten the name from Radio Reference to make it acceptable to the limits of alpha names in the WOUXUN radio.  I deleted the column from Radio Reference that I did not need.
  6. Once you have the data in the form you want, select the column of frequencies and past them into the table in KG-UV Commander.  Then paste in the names.  You can do a column at a time.
  7. Do any final editing as needed in KG-UV Commander
  8. Write the info to your radio.
  9. Export the file to your PC  to save a copy

There are some screen shots of this process at the end of this posting.

Setting the frequency limits on the WOUXUN

This is another great feature of KG-UV Commander.

It’s as simple as this page

I still have not fully experimented with this feature to see what the capability of my 2m/440MHz radio has on 220MHz band.  You can check out the various frequency band suggestions from WOUXUN in the image below (click to enlarge)

Does this work on a Mac?

If you have a Mac and want to run Windows software then one option is to use a Windows emulator.  Here is KG-UV Commander running under Windows XP Pro in Virtualbox (free).

You will need the USB driver from Wouxon (see screen shot) and you are good to go.  Note that the USB to serial device shows up and KG-UV Commander works just fine

The Take

The take on this one is easy.  Thanks to Jim Mitchell KC8UNJ for some great software.

And check out his other radio/PC interface software at:


How to paste frequencies from into KG-UV Commander

1. Here is the starting point, I had a few frequencies in the radio already.  This is the result of reading the contents of the radio into KG-UV Commander.  I have some repeater, FRS, and MURS frequencies in there already.


2. This is what I want from Radio Reference.  Select the frequencies in the table

3. Paste into Open Office with Paste Special… HTML format

4. Now clean it up.  Remove columns you don’t need.  Shorten names as needed.

5. Paste each column into KG-UV Commander.  Do any final editing.  Then write the contents to the radio.  Export the file for safe keeping

It’s just as simple as that.

Written by frrl

September 3, 2011 at 7:05 am

11 Responses

Subscribe to comments with RSS.

  1. Good morning Jim,

    I purchased a KG-UV3D but it had VHF and 1.25 centimeters in it. I downloaded your program, installed the proper UHF/VHF freq and they work but now I cannot transmit or receive on either band. Cab you help me if possible.

    Thanks Joe KD2NAN


    March 22, 2017 at 4:37 pm

  2. Please help guys love my wouxun kguv9d
    But struggling to program it will this be easy to use and will it be OK to use for North West repeater frequency in the UK
    It’s been a while I want to get back on the air but struggling to remember how the Tx rx works etc so wondering if this program will help me big time


    August 14, 2016 at 6:33 pm

  3. Can not get the 920p to program. Have loded the correct drivers and software to three difference computers and neather will work. Each one gives me “Failed connection! Pleasecheck if power on or well connected the com post! ” I have the correct com post in but still will not comucate with radio. Also have tried two cables with same results. Also instruction not clear to do manual programing.


    July 5, 2014 at 10:40 pm

  4. Does anyone know if there is an updated unlock program for the KG-UVD1P (Updated) model? The newer model uses a red programming cable which has a different driver and software than the older model that came with the black programming cable. The frequency files that are generated from the older model radios are also incompatible with the upgraded model and its accompanying software and the older Wouxun unlock program will not work with the newer radio either. Thank You.


    December 6, 2013 at 8:11 pm

  5. Jim, do you know if there is an unlock program available for the new KG-UVD1P updated that comes with the red interface cable? I know that frequency files from the older KG-UVD1P models are incompatible with the newer model as is the old black programming cable and the unlock program does not work either. Just curious as to whether someone had come up with an unlock program for the KG-UVD1P (Updated) model. Thank You.


    December 6, 2013 at 8:07 pm

  6. you can not change the band tx limit any more


    August 4, 2013 at 9:02 am



    June 28, 2013 at 8:37 pm

  8. good software


    March 14, 2013 at 5:49 pm

  9. Hi – I have tried to load an old “tw” file but it fails and tells me to import tw but that option is “greyed out” how do I import it?

    Andy Norrie

    March 5, 2012 at 6:08 pm

  10. Can I install rg commander on my Mac ??


    February 24, 2012 at 12:13 pm

    • You can run KG-UV Commander on a Mac under emulation. Virtualbox is free. See updated posting with screen shot.


      February 24, 2012 at 8:32 pm

Leave a Reply to Anonymous Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: